UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2565
                        
                            Issued:1972-03-03
                    
                            Revised:2019-11-06
                    
                            Style
                            2565
                        
                            Multiconductor with Extruded Insulation and Extruded Non-integral Jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			ConductorNo. 28 AWG - 16 AWG solid or stranded.
		
			InsulationExtruded PVC, 15 mils min average, 13 mils minimum at any point.
		
			AssemblyTwo to sixty-one conductors. Two conductors may be laid parallel or twisted together. Three or more conductors shall be twisted together. Lay of insulated conductors not specified, but with a twist opposite in direction to the direction in which the helical cord is wound.
		
			ShieldOptional. Over one or more of the individually insulated conductors may be shielded or groups of individually insulated conductors may be shielded. Shielding over conductor shall consist of 36-30 AWG applied as a wrap or braid.
		
			JacketExtruded PVC
		
			dia in inches
		
			0.425 or less32 mils min average26 mils minimum at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2565	Issued:1972-03-03
			Revised:2019-11-06


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	No. 28 AWG - 16 AWG solid or stranded.

Insulation	Extruded PVC, 15 mils min average, 13 mils minimum at any point.

Assembly	Two to sixty-one conductors. Two conductors may be laid parallel or twisted together. Three or more conductors shall be twisted together. Lay of insulated conductors not specified, but with a twist opposite in direction to the direction in which the helical cord is wound.

Shield	Optional. Over one or more of the individually insulated conductors may be shielded or groups of individually insulated conductors may be shielded. Shielding over conductor shall consist of 36-30 AWG applied as a wrap or braid.

Jacket	Extruded PVC
	dia in inches
	0.425 or less	32 mils min average	26 mils minimum at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.