UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2566
                        
                            Issued:1972-03-22
                    
                            Revised:2019-11-12
                    
                            Style
                            2566
                        
                            Multiple-Conductor Cable using Non-Integral Extruded Jacket.
                    
			Rating105 deg C, 300 Vac, Cable Flame, Oil Res. 60 or 80C, Gas & Moisture Res. 75C.
		
			Conductor26 AWG - 18 AWG, Solid or Stranded Round.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, all groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional - tinned soft iron shield applied as a braid with an overall Polyester tape wrap.
		
			JacketExtruded PVC
		
			dia in inches
		
			0.350 or less30 mils min average24 mils minimum at any point
		
			0.351-0.450 dia40 avg32 min
		
			0.451-0.550 dia50 avg40 min
		
			0.551-0.750 dia60 avg48 min
		
			0.751-0.950 dia70 avg56 min
		
			0.951-1.200 dia80 avg64 min
		
			CoveringExtruded Nylon, Applied over Jacket.
		
			Dia. in inches
		
			0.350 or lessmin. thickness 4 mils at any point
		
			0.351 - 0.4505 mils
		
			0.451 - 0.5506 mils
		
			0.551 - 0.7507 mils
		
			0.751 - 0.9508 mils
		
			0.951 - 1.2009 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2566	Issued:1972-03-22
			Revised:2019-11-12


Rating	105 deg C, 300 Vac, Cable Flame, Oil Res. 60 or 80C, Gas & Moisture Res. 75C.

Conductor	26 AWG - 18 AWG, Solid or Stranded Round.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, all groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional - tinned soft iron shield applied as a braid with an overall Polyester tape wrap.

Jacket	Extruded PVC
	dia in inches
	0.350 or less	30 mils min average	24 mils minimum at any point
	0.351-0.450 dia	40 avg	32 min
	0.451-0.550 dia	50 avg	40 min
	0.551-0.750 dia	60 avg	48 min
	0.751-0.950 dia	70 avg	56 min
	0.951-1.200 dia	80 avg	64 min

Covering	Extruded Nylon, Applied over Jacket.
	Dia. in inches
	0.350 or less	min. thickness 4 mils at any point
	0.351 - 0.450	5 mils
	0.451 - 0.550	6 mils
	0.551 - 0.750	7 mils
	0.751 - 0.950	8 mils
	0.951 - 1.200	9 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Interconnection.