UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2571
                        
                            Issued:1972-04-25
                    
                            Revised:2019-11-06
                    
                            Style
                            2571
                        
                            Extruded jacketed cable
                    
			Rating80 deg C, Voltage not specified, Cable flame.
		
			Conductor40 AWG min solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketPVC
		
			major dia in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia60 avg48 min
		
			1.001-1.500 dia80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or External Interconnection of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2571	Issued:1972-04-25
			Revised:2019-11-06


Rating	80 deg C, Voltage not specified, Cable flame.

Conductor	40 AWG min solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	PVC
	major dia in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	60 avg	48 min
	1.001-1.500 dia	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or External Interconnection of Electronic Equipment.