UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2574
                        
                            Issued:1972-05-05
                    
                            Revised:2019-11-06
                    
                            Style
                            2574
                        
                            Low Voltage Cable.
                    
			Rating105 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG min. solid or stranded, tinned or bare copper.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketPVC
		
			major dia in inches
		
			0.425 or less30 mils min average24 mils minimum at any point
		
			0.426-0.700 dia45 avg36 min
		
			0.701-1.000 dia60 avg48 min
		
			1.001-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2574	Issued:1972-05-05
			Revised:2019-11-06


Rating	105 deg C, 30 Vac, Cable flame.

Conductor	40 AWG min. solid or stranded, tinned or bare copper.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	PVC
	major dia in inches
	0.425 or less	30 mils min average	24 mils minimum at any point
	0.426-0.700 dia	45 avg	36 min
	0.701-1.000 dia	60 avg	48 min
	1.001-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.