UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2576
                        
                            Issued:1972-05-08
                    
                            Revised:2013-03-04
                    
                            Style
                            2576
                        
                            Multiple Conductor Cable with Extruded Non-integral Jacket
                    
			Rating80 deg C, 150 Vac, Cable flame.
		
			Conductor36-9 AWG, solid or stranded.
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable. Conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. The use of a barrier layer and/or fillers is optional. Cable may contain Labeled Flat Ribbon Style AWM which may be rolled or spiralled and formed around fillers or bunched singles. Fillers and/or tape wrap or extruded covering may be used.
		
			CoveringOptional, extruded PVC, 5 mils minimum thickness at any point, over one or more groups of conductors.
		
			ShieldOptional. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.
		
			JacketExtruded PVC.
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			1.000 inch or less30 mils24 mils
		
			1.001-1.500 inch45 mils36 mils
		
			1.501-2.500 inch60 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2576	Issued:1972-05-08
			Revised:2013-03-04


Rating	80 deg C, 150 Vac, Cable flame.

Conductor	36-9 AWG, solid or stranded.

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable. Conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. The use of a barrier layer and/or fillers is optional. Cable may contain Labeled Flat Ribbon Style AWM which may be rolled or spiralled and formed around fillers or bunched singles. Fillers and/or tape wrap or extruded covering may be used.

Covering	Optional, extruded PVC, 5 mils minimum thickness at any point, over one or more groups of conductors.

Shield	Optional. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.

Jacket	Extruded PVC.
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	1.000 inch or less	30 mils	24 mils
	1.001-1.500 inch	45 mils	36 mils
	1.501-2.500 inch	60 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.