UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2582
                        
                            Issued:1972-05-19
                    
                            Revised:2012-03-12
                    
                            Style
                            2582
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating60 deg C, 150 Vac, Cable flame.
		
			Conductor30 AWG - 16 AWG solid or stranded round, tinned or bare.
		
			InsulationExtruded PE - POLYETHYLENE or extruded FRPE, 12 mils minimum average thickness, 10 mils minimum thickness at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional) A 6 mil thick or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacket (inches) ¿Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.395 or less3024
		
			0.396-0.5003528
		
			0.501-0.7005040
		
			Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2582	Issued:1972-05-19
			Revised:2012-03-12


Rating	60 deg C, 150 Vac, Cable flame.

Conductor	30 AWG - 16 AWG solid or stranded round, tinned or bare.

Insulation	Extruded PE - POLYETHYLENE or extruded FRPE, 12 mils minimum average thickness, 10 mils minimum thickness at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) A 6 mil thick or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	Diameter of core assembly under jacket (inches) ¿	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.395 or less	30	24
	0.396-0.500	35	28
	0.501-0.700	50	40
	Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.