UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2584
                        
                            Issued:1972-06-02
                    
                            Revised:2012-12-20
                    
                            Style
                            2584
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 125 Vac, Cable flame.
		
			Insulated Conductor40-9 AWG.  Labeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together.  The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable.  The lay of the conductors is not specified.  A barrier layer and/or fillers are optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			CoveringOptional - Extruded PVC, 6 mils minimum thickness.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			@Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701 to 1.000 inch45 mils36 mils
		
			1.001 to 1.500 inch60 mils48 mils
		
			@ - Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2584	Issued:1972-06-02
			Revised:2012-12-20


Rating	80 deg C, 125 Vac, Cable flame.

Insulated Conductor	40-9 AWG. Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional - Extruded PVC, 6 mils minimum thickness.

Shield	Optional.

Jacket	Extruded PVC
	@Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701 to 1.000 inch	45 mils	36 mils
	1.001 to 1.500 inch	60 mils	48 mils
	@ - Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.