UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2586
                        
                            Issued:1972-02-14
                    
                            Revised:2013-01-03
                    
                            Style
                            2586
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C, 600 or 1000 Vac, Cable flame.
		
			Conductor40 AWG minimum.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors or groups of conductors laid parallel or twisted forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional, Extruded PVC, 6 mils minimum thickness at any point.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of cable under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.501 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			* - Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2586	Issued:1972-02-14
			Revised:2013-01-03


Rating	105 deg C, 600 or 1000 Vac, Cable flame.

Conductor	40 AWG minimum.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more conductors or groups of conductors laid parallel or twisted forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional, Extruded PVC, 6 mils minimum thickness at any point.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of cable under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.501 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	* - Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring.