UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2587
                        
                            Issued:1972-06-15
                    
                            Revised:2012-04-20
                    
                            Style
                            2587
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG min, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified.  A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional, extruded PVC, a 6 mils or heavier, may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Dia of round assembly under jacket inchesMinimum average thickness milsMinimum at any point mils
		
			0.700 or less3024
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			1.501-2.50011088
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2587	Issued:1972-06-15
			Revised:2012-04-20


Rating	90 deg C, 600 Vac, Cable flame.

Conductor	40 AWG min, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional, extruded PVC, a 6 mils or heavier, may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Dia of round assembly under jacket inches	Minimum average thickness mils	Minimum at any point mils
	0.700 or less	30	24
	0.701-1.000	60	48
	1.001-1.500	80	64
	1.501-2.500	110	88

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring.