UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2589
                        
                            Issued:1972-06-16
                    
                            Revised:2011-09-14
                    
                            Style
                            2589
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 30 Vac, Cable flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional - Extruded PVC, 6 mils minimum over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessminimum thickness at any point
		
			0.425 inch or less30 mils24 mils
		
			0.426-0.700 inch45 mils36 mils
		
			0.70-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2589	Issued:1972-06-16
			Revised:2011-09-14


Rating	105 deg C, 30 Vac, Cable flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional - Extruded PVC, 6 mils minimum over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	minimum thickness at any point
	0.425 inch or less	30 mils	24 mils
	0.426-0.700 inch	45 mils	36 mils
	0.70-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.