UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2614
                        
                            Issued:1973-03-05
                    
                            Revised:2012-03-08
                    
                            Style
                            2614
                        
                            Multiple-Conductor Cable using Non-Integral Jacket
                    
			Rating105 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure except that Styles rated 30 Volts for Class 2 operation may not be used.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. Extruded PVC, a 6 mils or heavier, may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacket inchesMinimum average thickness milsMinimum thickness at any point mils
		
			0.425 or less3024
		
			0.426-0.7004536
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			1.501-2.50011088
		
			2.501 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2614	Issued:1973-03-05
			Revised:2012-03-08


Rating	105 deg C, 30 Vac, Cable flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure except that Styles rated 30 Volts for Class 2 operation may not be used.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, a 6 mils or heavier, may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket inches	Minimum average thickness mils	Minimum thickness at any point mils
	0.425 or less	30	24
	0.426-0.700	45	36
	0.701-1.000	60	48
	1.001-1.500	80	64
	1.501-2.500	110	88
	2.501 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring.