UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2631
                        
                            Issued:1973-05-22
                    
                            Revised:2019-11-06
                    
                            Style
                            2631
                        
                            Multiple Conductor with Extruded Non-integral Jacket.
                    
			Rating90 deg C, voltage not specified, Cable flame.
		
			Conductor40 AWG min, solid or stranded round.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			major dia in inches
		
			0.700 or less60 mils min average48 mils minimum at any point
		
			0.701 to 1.500 dia80 avg64 min
		
			1.501 to 2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of computers and electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2631	Issued:1973-05-22
			Revised:2019-11-06


Rating	90 deg C, voltage not specified, Cable flame.

Conductor	40 AWG min, solid or stranded round.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	major dia in inches
	0.700 or less	60 mils min average	48 mils minimum at any point
	0.701 to 1.500 dia	80 avg	64 min
	1.501 to 2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of computers and electronic equipment.