UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2633
                        
                            Issued:1973-05-18
                    
                            Revised:2012-04-05
                    
                            Style
                            2633
                        
                            Laminated Flat Ribbon Cable.
                    
			Rating105 deg C, 90 Vac, Horizontal flame.
		
			Conductor16 AWG - 6 AWG Flat bare copper. Width variable from 250-750 mils. Thickness variable from 8-25 mils.
		
			InsulationPETP tape, 4 mils min average.
		
			AssemblyConsists of two conductors covered with three layers of oriented polyethylene terephthalate tape; each layer backed with a 1 mil polyester adhesive. The first layer of tape, 1 mil thick, is longitudinally and separately applied over each conductor, leaving an approximate 1/16 inch spacing between the edges of tape. The two conductors are then laid parallel with a polyester fibrous thread laid between the two conductors. A second tape, 1 mil thick, is applied to this assembly covering the spacings formed by the first tape. The third layer of tape, two mils thick, is then wrapped longitudinally around the assembly so that the separation of approximately 1/16 inch is centered over the fibrous thread and second layer of tape.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic computers and electric business machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2633	Issued:1973-05-18
			Revised:2012-04-05


Rating	105 deg C, 90 Vac, Horizontal flame.

Conductor	16 AWG - 6 AWG Flat bare copper. Width variable from 250-750 mils. Thickness variable from 8-25 mils.

Insulation	PETP tape, 4 mils min average.

Assembly	Consists of two conductors covered with three layers of oriented polyethylene terephthalate tape; each layer backed with a 1 mil polyester adhesive. The first layer of tape, 1 mil thick, is longitudinally and separately applied over each conductor, leaving an approximate 1/16 inch spacing between the edges of tape. The two conductors are then laid parallel with a polyester fibrous thread laid between the two conductors. A second tape, 1 mil thick, is applied to this assembly covering the spacings formed by the first tape. The third layer of tape, two mils thick, is then wrapped longitudinally around the assembly so that the separation of approximately 1/16 inch is centered over the fibrous thread and second layer of tape.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic computers and electric business machines.