UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2636
                        
                            Issued:1973-05-22
                    
                            Revised:2012-04-23
                    
                            Style
                            2636
                        
                            Multiple-Conductor Cable using Non-Integral Jacket.
                    
			Rating60 deg C, voltage not specified, VW-1 flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure, 2 mils min average.
		
			AssemblyMulti conductors. A. One, coaxial cable similar to Style 1354, except overall covering is a full cotton serve. B. One 18 AWG stranded Labelled Style 1007. C. One 18 AWG stranded Labelled Style 1017. D. Four 24 AWG stranded Labelled Style 1011, twisted together, over them a full cotton serve, with .031" nominal wall PVC jacket over this assembly. E. Seven 24 AWG stranded Labelled Style 1007, twisted together, around the 18 AWG Labelled 1007 conductor with a braided copper shield over the cabled Labelled conductors, a full cotton serve overall. F. Four No.24 AWG stranded, employing 15 mil wall of "FR-Poly" insulation, twisted together with a braided copper shield over the cabled conductors, a full cotton serve overall. Assembly Fillers may be used in the cable but are not required. The length of lay of the individual conductors or groups of conductors not specified. A barrier layer may be employed, such as a fibrous wrap, serving or braid.
		
			Shield(Optional) 36-30 AWG tinned or untinned copper applied as a wrap of braid or a wrap of aluminum-faced Polyester tape. An uninsulated drain wire may be used. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.
		
			CoveringA full cotton serve over the completed assembly.
		
			JacketPVC, 60 mils min average, 48 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseVideo camera cable
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2636	Issued:1973-05-22
			Revised:2012-04-23


Rating	60 deg C, voltage not specified, VW-1 flame.

Insulation	Labeled or complying with manufacturer's AWM procedure, 2 mils min average.

Assembly	Multi conductors. A. One, coaxial cable similar to Style 1354, except overall covering is a full cotton serve. B. One 18 AWG stranded Labelled Style 1007. C. One 18 AWG stranded Labelled Style 1017. D. Four 24 AWG stranded Labelled Style 1011, twisted together, over them a full cotton serve, with .031" nominal wall PVC jacket over this assembly. E. Seven 24 AWG stranded Labelled Style 1007, twisted together, around the 18 AWG Labelled 1007 conductor with a braided copper shield over the cabled Labelled conductors, a full cotton serve overall. F. Four No.24 AWG stranded, employing 15 mil wall of "FR-Poly" insulation, twisted together with a braided copper shield over the cabled conductors, a full cotton serve overall. Assembly Fillers may be used in the cable but are not required. The length of lay of the individual conductors or groups of conductors not specified. A barrier layer may be employed, such as a fibrous wrap, serving or braid.

Shield	(Optional) 36-30 AWG tinned or untinned copper applied as a wrap of braid or a wrap of aluminum-faced Polyester tape. An uninsulated drain wire may be used. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.

Covering	A full cotton serve over the completed assembly.

Jacket	PVC, 60 mils min average, 48 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Video camera cable