UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2637
                        
                            Issued:1973-05-22
                    
                            Revised:2012-06-29
                    
                            Style
                            2637
                        
                            Multiple Conductor Cable with Extruded Non-integral Jacket.
                    
			Rating90 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG minimum solid or stranded round.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			Covering(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC major dia in inches of 0.425 or less, 30 mils min average, 24 mils minimum at any point; 0.426-0.70 dia, 45 avg, 36 min; 0.701-1.000 dia, 60 avg, 48 min; 1.001-1.500 dia, 80 avg, 64 min; 1.501-2.500 dia, 110 avg, 88 min; 2.501 dia and larger, 140 avg, 112 min.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2637	Issued:1973-05-22
			Revised:2012-06-29


Rating	90 deg C, 30 Vac, Cable flame.

Conductor	40 AWG minimum solid or stranded round.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC major dia in inches of 0.425 or less, 30 mils min average, 24 mils minimum at any point; 0.426-0.70 dia, 45 avg, 36 min; 0.701-1.000 dia, 60 avg, 48 min; 1.001-1.500 dia, 80 avg, 64 min; 1.501-2.500 dia, 110 avg, 88 min; 2.501 dia and larger, 140 avg, 112 min.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.