UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2638
                        
                            Issued:1973-06-05
                    
                            Revised:2012-07-30
                    
                            Style
                            2638
                        
                            Laminated Flat Ribbon Cable.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor16 AWG maximun solid or stranded round.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo to 100 insulated singles laid parallel in one plane over the ground plane and laminated between 2 sheets of extruded PVC 50 mil min edge width. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable. Drain Wire - May include one or two bare or tinned drain wires on one or both sides, parallel to conductor assembly in contact with ground plane. Ground Plane - Expanded copper: 3 mils minimum thickness.
		
			ShieldOptional.
		
			JacketNon-Extruded PVC
		
			bottom sheet 10 mils minimum average8 mils minimum at any point
		
			top sheet 5 mils minimum average4 mils minimum at any point
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2638	Issued:1973-06-05
			Revised:2012-07-30


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	16 AWG maximun solid or stranded round.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two to 100 insulated singles laid parallel in one plane over the ground plane and laminated between 2 sheets of extruded PVC 50 mil min edge width. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable. Drain Wire - May include one or two bare or tinned drain wires on one or both sides, parallel to conductor assembly in contact with ground plane. Ground Plane - Expanded copper: 3 mils minimum thickness.

Shield	Optional.

Jacket	Non-Extruded PVC
	bottom sheet 10 mils minimum average	8 mils minimum at any point
	top sheet 5 mils minimum average	4 mils minimum at any point

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.