UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2643
                        
                            Issued:1973-07-31
                    
                            Revised:2018-01-16
                    
                            Style
                            2643
                        
                            Flat Cable.
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor32 AWG - 10 AWG round or flat, nickel, silver, gold, or tin plated or bare copper, or polyurethane coated copper. May use same or mixed AWG size. Minimum thickness of 1.5 mils; maximum thickness of 20.0 mils.  Minimum width of 10 mils and maximum width of 350 mils.
		
			InsulationOn each side of the conductors is 3.5 mils minimum of PVC adhesive or 1.5 mils minimum of polyester adhesive bonded to  biaxially oriented Polyethylene Terephthalate (PET) with minimum average thickness 2.0 mils, minimum thickness at any point 1.5 mils.
		
			AssemblyTwo through 150 conductors may be straight or irregular shaped and laid parallel and in one plane.  Minimum 16 mils insulation width on outside edges of conductors and 16 mils minimum insulation width between adjacent conductors.  Length of insulated conductors not specified.
		
			ShieldOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2643	Issued:1973-07-31
			Revised:2018-01-16


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	32 AWG - 10 AWG round or flat, nickel, silver, gold, or tin plated or bare copper, or polyurethane coated copper. May use same or mixed AWG size. Minimum thickness of 1.5 mils; maximum thickness of 20.0 mils. Minimum width of 10 mils and maximum width of 350 mils.

Insulation	On each side of the conductors is 3.5 mils minimum of PVC adhesive or 1.5 mils minimum of polyester adhesive bonded to biaxially oriented Polyethylene Terephthalate (PET) with minimum average thickness 2.0 mils, minimum thickness at any point 1.5 mils.

Assembly	Two through 150 conductors may be straight or irregular shaped and laid parallel and in one plane. Minimum 16 mils insulation width on outside edges of conductors and 16 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.

Shield	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.