UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2644
                        
                            Issued:1973-07-31
                    
                            Revised:2011-08-11
                    
                            Style
                            2644
                        
                            Bonded Flat Ribbon Cable
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor32 AWG - 12 AWG flat or round, straight or irregular, 1.5 - 6.0 mils thick, 10-100 mils wide.
		
			InsulationPET, PETP or PVC, 5 mils min average. One, each side of conductors, minimum 3.5 mils PVC bonded to minimum 0.4 mils Biaxially oriented Polyethylene Terephthalate
		
			AssemblyTwo to 150 conductors laid parallel in one plane, 10 mils minimum edge width and 16 mils minimum between conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2644	Issued:1973-07-31
			Revised:2011-08-11


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	32 AWG - 12 AWG flat or round, straight or irregular, 1.5 - 6.0 mils thick, 10-100 mils wide.

Insulation	PET, PETP or PVC, 5 mils min average. One, each side of conductors, minimum 3.5 mils PVC bonded to minimum 0.4 mils Biaxially oriented Polyethylene Terephthalate

Assembly	Two to 150 conductors laid parallel in one plane, 10 mils minimum edge width and 16 mils minimum between conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in Electronic Equipment.