UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2654
                        
                            Issued:1973-08-22
                    
                            Revised:2019-11-06
                    
                            Style
                            2654
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 300 Vac, Cable flame.
		
			Conductor36 AWG - 6 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with no more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic- tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			dia in inches
		
			0.700 or less30 mils min average23 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501 dia and larger110 avg88 min
		
			4.001 dia and larger140 ave112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2654	Issued:1973-08-22
			Revised:2019-11-06


Rating	90 deg C, 300 Vac, Cable flame.

Conductor	36 AWG - 6 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with no more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic- tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded PVC
	dia in inches
	0.700 or less	30 mils min average	23 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501 dia and larger	110 avg	88 min
	4.001 dia and larger	140 ave	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.