UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2667
                        
                            Issued:1973-09-18
                    
                            Revised:2012-06-29
                    
                            Style
                            2667
                        
                            Multiple Conductor with Extruded Insulation with an Extruded Non-integral Jacket.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor26 AWG - 16 AWG solid or stranded round.
		
			InsulationExtruded PE or Extruded FRPE, 15 mils min average, 13 mils minimum at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layerand/or fillers are optional.  May use same or mixed AWG size.
		
			Covering(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC major dia in inches of 0.350 or less, 15 mils min average, 12 mils minimum at any point; 0.351-0.700 dia, 30 avg,24 min; 0.701-1.000 dia, 45 avg, 36 min; 1.001-1.500 dia, 60 avg, 48 min.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2667	Issued:1973-09-18
			Revised:2012-06-29


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	26 AWG - 16 AWG solid or stranded round.

Insulation	Extruded PE or Extruded FRPE, 15 mils min average, 13 mils minimum at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layerand/or fillers are optional. May use same or mixed AWG size.

Covering	(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC major dia in inches of 0.350 or less, 15 mils min average, 12 mils minimum at any point; 0.351-0.700 dia, 30 avg,24 min; 0.701-1.000 dia, 45 avg, 36 min; 1.001-1.500 dia, 60 avg, 48 min.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.