UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2675
                        
                            Issued:1973-11-09
                    
                            Revised:2012-02-02
                    
                            Style
                            2675
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwenty-eight conductors.  
C1, C2, and C3 -- Three 28 AWG Style 1589 with 7 mils wall thickness of extruded PP, twisted together with copper braid over each group.  The groups are then twisted together.  
1, 2, and 3 -- Twelve conductors consisting of seven 26 AWG Style 1061 and five 28 AWG in 3 groups of 4 conductors.  Each group twist together.  
4, 5, and 6 --  18 AWG Style 1061.
7, 8, 9, and 10 -- 20 AWG Style 1061 conductors 1 through 10 are cabled around center group of C1, C2, and C3, then covered with a cotton serve, or polyester tape, paper tape and/or fiberglass tape.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInterconnecting Cable for Medical Instruments.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2675	Issued:1973-11-09
			Revised:2012-02-02


Rating	60 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Twenty-eight conductors. C1, C2, and C3 -- Three 28 AWG Style 1589 with 7 mils wall thickness of extruded PP, twisted together with copper braid over each group. The groups are then twisted together. 1, 2, and 3 -- Twelve conductors consisting of seven 26 AWG Style 1061 and five 28 AWG in 3 groups of 4 conductors. Each group twist together. 4, 5, and 6 -- 18 AWG Style 1061. 7, 8, 9, and 10 -- 20 AWG Style 1061 conductors 1 through 10 are cabled around center group of C1, C2, and C3, then covered with a cotton serve, or polyester tape, paper tape and/or fiberglass tape.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Interconnecting Cable for Medical Instruments.