UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2679
                        
                            Issued:1974-02-04
                    
                            Revised:2019-11-06
                    
                            Style
                            2679
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 60 Vac, Cable flame.
		
			Conductor32 AWG min., Copper, Copper Clad Steel, or Copper Alloy, Bare or Coated (tin or silver), solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure. Designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or groups of Assemblyinsulated conductors cabled together. Length of lay of the twisted conductors or groups not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly or individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded XLPO-THERMOSET POLYOLEFIN
		
			dia in inches
		
			0.700 or less60 mils min average48 mils minimum at any point
		
			0.701-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.500 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use with electronic computers and business machines, Class 2 wiring systems only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2679	Issued:1974-02-04
			Revised:2019-11-06


Rating	60 deg C, 60 Vac, Cable flame.

Conductor	32 AWG min., Copper, Copper Clad Steel, or Copper Alloy, Bare or Coated (tin or silver), solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure. Designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or groups of Assemblyinsulated conductors cabled together. Length of lay of the twisted conductors or groups not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly or individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded XLPO-THERMOSET POLYOLEFIN
	dia in inches
	0.700 or less	60 mils min average	48 mils minimum at any point
	0.701-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.500 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use with electronic computers and business machines, Class 2 wiring systems only.