UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2697
                        
                            Issued:1974-06-18
                    
                            Revised:2012-07-01
                    
                            Style
                            2697
                        
                            Laminated Flat Cable.
                    
			Rating80 deg C, 300 Vac, Horizontal Flame.
		
			Conductor30-16 AWG, Solid or Stranded Round.
		
			InsulationIntegral with Jacket. Labeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to a PVC-Polyester or PVC covering in such a fashion to form a flat ribbon type cable. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable. Sections may be slit into singles or groups of conductors. Insulated conductors with optional covering, optional shield and optional covering.
		
			Inner CoveringOptional - Extruded PVC or One or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mil minimum at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified.
		
			ShieldOptional.
		
			Outer CoveringOptional - Extruded PVC, 5 mils minimum at any point, 80 mils maximum.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2697	Issued:1974-06-18
			Revised:2012-07-01


Rating	80 deg C, 300 Vac, Horizontal Flame.

Conductor	30-16 AWG, Solid or Stranded Round.

Insulation	Integral with Jacket. Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to a PVC-Polyester or PVC covering in such a fashion to form a flat ribbon type cable. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable. Sections may be slit into singles or groups of conductors. Insulated conductors with optional covering, optional shield and optional covering.

Inner Covering	Optional - Extruded PVC or One or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mil minimum at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified.

Shield	Optional.

Outer Covering	Optional - Extruded PVC, 5 mils minimum at any point, 80 mils maximum.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.