UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2726
                        
                            Issued:1975-04-30
                    
                            Revised:2019-11-06
                    
                            Style
                            2726
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating40 AWG minimum. 60 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly or groups of singles.
		
			JacketPVC
		
			cable dia in inches
		
			0.250 or less15 mils min average12 mils minimum at any point
		
			0.251-0.425 dia30 avg24 min
		
			0.426-0.700 dia45 avg36 min
		
			0.701-1.000 dia60 avg48 min
		
			1.001-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2726	Issued:1975-04-30
			Revised:2019-11-06


Rating	40 AWG minimum. 60 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly or groups of singles.

Jacket	PVC
	cable dia in inches
	0.250 or less	15 mils min average	12 mils minimum at any point
	0.251-0.425 dia	30 avg	24 min
	0.426-0.700 dia	45 avg	36 min
	0.701-1.000 dia	60 avg	48 min
	1.001-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.