UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2735
                        
                            Issued:1975-05-12
                    
                            Revised:2011-08-04
                    
                            Style
                            2735
                        
                            Multiple-Conductor Parallel Cable with Extruded Non-Integral Jacket
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled Style 2445
		
			ShieldOptional, or expanded metallic ground planes, one or both sides. The ground plane may be flat copper or aluminum and may be employed as a solid or mesh constructions.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			2.250 or less3024
		
			2.251-4.0004536
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment, in Class 2 or Class 3 circuits where protected from mechanical abuse.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2735	Issued:1975-05-12
			Revised:2011-08-04


Rating	60 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled Style 2445

Shield	Optional, or expanded metallic ground planes, one or both sides. The ground plane may be flat copper or aluminum and may be employed as a solid or mesh constructions.

Jacket	Extruded PVC
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	2.250 or less	30	24
	2.251-4.000	45	36

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment, in Class 2 or Class 3 circuits where protected from mechanical abuse.