UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2744
                        
                            Issued:1975-10-15
                    
                            Revised:2012-02-24
                    
                            Style
                            2744
                        
                            Laminated Flat Ribbon Cable.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Insulated ConductorLabeled or complies with Manufacturer's AWM Procedure having a minimum rating of 80 deg C, 300 Vac, 16 AWG maximum. May include mixed AWG sizes.

			AssemblyFrom 2 to 100 insulated singles bonded together laid parallel in one plane over the ground plane and laminated between 2 sheets of extruded PVC providing minimum 50 mils edge width. May include two or more groups of bonded singles, each with a separate ground plane. All groups laid flat in one plane may be separated by a web formed by laminated jacket. Manufacturer shall maintain a record of all singles used in each cable.

			Ground PlaneFlat tinned copper braid, 40 mils maximum thickness.
		
			JacketExtruded PVC, 10 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2744	Issued:1975-10-15
			Revised:2012-02-24


Rating	80 deg C, 300 Vac, Horizontal flame.

Insulated Conductor	Labeled or complies with Manufacturer's AWM Procedure having a minimum rating of 80 deg C, 300 Vac, 16 AWG maximum. May include mixed AWG sizes.

Assembly	From 2 to 100 insulated singles bonded together laid parallel in one plane over the ground plane and laminated between 2 sheets of extruded PVC providing minimum 50 mils edge width. May include two or more groups of bonded singles, each with a separate ground plane. All groups laid flat in one plane may be separated by a web formed by laminated jacket. Manufacturer shall maintain a record of all singles used in each cable.

Ground Plane	Flat tinned copper braid, 40 mils maximum thickness.

Jacket	Extruded PVC, 10 mils minimum average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.