UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2752
                        
                            Issued:1975-10-20
                    
                            Revised:2012-04-11
                    
                            Style
                            2752
                        
                            Laminated Flat Cable.
                    
			Rating80 deg C, 30 Vac, Horizontal Flame.
		
			Conductor40 AWG min, Flat or Round. Flat conductors max 6 mils thick, 100 mils wide.
		
			InsulationNon-Extruded Laminated PET or Non-Extruded Laminated PVC, 4 mils min average. Composite sheets of 1 mil PET and 4 mils PVC each side. Min 1 mil insulation over the conductors.
		
			AssemblyTwo to 100 uninsulated conductors laid parallel in one plane, laminated between 2 composite sheets of PET and PVC. May include mixed AWG sizes. Min 8 mils between conductors, 40 mils min edge width.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2752	Issued:1975-10-20
			Revised:2012-04-11


Rating	80 deg C, 30 Vac, Horizontal Flame.

Conductor	40 AWG min, Flat or Round. Flat conductors max 6 mils thick, 100 mils wide.

Insulation	Non-Extruded Laminated PET or Non-Extruded Laminated PVC, 4 mils min average. Composite sheets of 1 mil PET and 4 mils PVC each side. Min 1 mil insulation over the conductors.

Assembly	Two to 100 uninsulated conductors laid parallel in one plane, laminated between 2 composite sheets of PET and PVC. May include mixed AWG sizes. Min 8 mils between conductors, 40 mils min edge width.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.