UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2772
                        
                            Issued:1976-01-14
                    
                            Revised:2019-11-06
                    
                            Style
                            2772
                        
                            Multiple Conductor Cable with Extruded Insulation with an Extruded Non-integral Jacket.
                    
			Rating60 deg C, 150 Vac, Cable flame.
		
			Conductor30 AWG - 18 AWG solid or stranded round.
		
			InsulationExtruded PP, 12 mils min average, 11 mils minimum at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional
		
			Covering(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			major dia in inches
		
			0.395 or less30 mils min average24 mils minimum at any point
		
			0.396 to 0.500 dia35 avg30 min
		
			0.501 to 0.700 dia50 avg43 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnect of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2772	Issued:1976-01-14
			Revised:2019-11-06


Rating	60 deg C, 150 Vac, Cable flame.

Conductor	30 AWG - 18 AWG solid or stranded round.

Insulation	Extruded PP, 12 mils min average, 11 mils minimum at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional

Covering	(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	major dia in inches
	0.395 or less	30 mils min average	24 mils minimum at any point
	0.396 to 0.500 dia	35 avg	30 min
	0.501 to 0.700 dia	50 avg	43 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnect of electronic equipment.