UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2775
                        
                            Issued:1976-02-17
                    
                            Revised:2012-04-23
                    
                            Style
                            2775
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 250 Vac, Cable flame, 75 deg C Wet.
		
			ConductorResistance Wire. Nickel, copper alloy or copper, sizes vary depending upon wattage demand. May be spirally wound around a thread core.
		
			InsulationExtruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point. Required QMTT2 PVC Compound suitable for 75 deg C Wet or See Facing Page for PVC Compound.
		
			AssemblyTwo conductors, cable consists of the insulated single laid parallel with an overall jacket and an interconnecting web with 40 mils minimum thickness at any point.
		
			ShieldOptional - May be provided with a shield over the insulated single.
		
			JacketExtruded PVC, 20 mils minimum average thickness, 16 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseHeating Cable for Pipe Heating Units.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2775	Issued:1976-02-17
			Revised:2012-04-23


Rating	105 deg C, 250 Vac, Cable flame, 75 deg C Wet.

Conductor	Resistance Wire. Nickel, copper alloy or copper, sizes vary depending upon wattage demand. May be spirally wound around a thread core.

Insulation	Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point. Required QMTT2 PVC Compound suitable for 75 deg C Wet or See Facing Page for PVC Compound.

Assembly	Two conductors, cable consists of the insulated single laid parallel with an overall jacket and an interconnecting web with 40 mils minimum thickness at any point.

Shield	Optional - May be provided with a shield over the insulated single.

Jacket	Extruded PVC, 20 mils minimum average thickness, 16 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Heating Cable for Pipe Heating Units.