UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2778
                        
                            Issued:1976-04-08
                    
                            Revised:2019-11-12
                    
                            Style
                            2778
                        
                            Jacketed Cord.
                    
			Rating60 deg C, 150 Vac, Cable flame.
		
			Conductor30 AWG - 16 AWG solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo or more twisted insulated singles or groups of insulated singles twisted together. Lay not specified. Barrier layer optional. Manufacturer shall maintain a complete description of each assembly. Fillers - Required if necessary to form a relatively smooth round core for extrusion of outer jacket.
		
			ShieldOptional.
		
			CoveringOptional) A nominal 15 mil PVC covering may be extruded over the conductor assembly.
		
			JacketPVC
		
			dia in inches
		
			0.425 or less30 mils min average28 mils minimum at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2778	Issued:1976-04-08
			Revised:2019-11-12


Rating	60 deg C, 150 Vac, Cable flame.

Conductor	30 AWG - 16 AWG solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two or more twisted insulated singles or groups of insulated singles twisted together. Lay not specified. Barrier layer optional. Manufacturer shall maintain a complete description of each assembly. Fillers - Required if necessary to form a relatively smooth round core for extrusion of outer jacket.

Shield	Optional.

Covering	Optional) A nominal 15 mil PVC covering may be extruded over the conductor assembly.

Jacket	PVC
	dia in inches
	0.425 or less	30 mils min average	28 mils minimum at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of external interconnection of electronic equipment.