UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2785
                        
                            Issued:1976-06-01
                    
                            Revised:2019-11-06
                    
                            Style
                            2785
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. the conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional) - A 6 mil or heavier extruded PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			major dia in inches
		
			0.250 or less15 mils min average12 mils minimum at any point
		
			0.25l-0.700 dia30 avg24 min
		
			0.701-1.000 dia60 avg48 min
		
			l.00l-l.500 dia80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2785	Issued:1976-06-01
			Revised:2019-11-06


Rating	60 deg C, 300 Vac, Horizontal flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. the conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) - A 6 mil or heavier extruded PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	major dia in inches
	0.250 or less	15 mils min average	12 mils minimum at any point
	0.25l-0.700 dia	30 avg	24 min
	0.701-1.000 dia	60 avg	48 min
	l.00l-l.500 dia	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Electronic Equipment.