UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2786
                        
                            Issued:1976-06-01
                    
                            Revised:2019-11-06
                    
                            Style
                            2786
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, Voltage not specified, Horizontal flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. the conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional) - A 6 mil or heavier extruded PVC covering may be over the conductor assembly.
		
			JacketExtruded PVC;
		
			major dia in inches
		
			0.250 or less15 mils minimum average thickness12 mils minimum thickness at any point
		
			0.251-0.700 dia30 avg24 min
		
			0.701-1.000 dia60 avg48 min
		
			1.001-1.500 dia80 avg64 min.
		
			- Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2786	Issued:1976-06-01
			Revised:2019-11-06


Rating	60 deg C, Voltage not specified, Horizontal flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. the conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) - A 6 mil or heavier extruded PVC covering may be over the conductor assembly.

Jacket	Extruded PVC;
	major dia in inches
	0.250 or less	15 mils minimum average thickness	12 mils minimum thickness at any point
	0.251-0.700 dia	30 avg	24 min
	0.701-1.000 dia	60 avg	48 min
	1.001-1.500 dia	80 avg	64 min.

	- Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.