UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2789
                        
                            Issued:1976-05-21
                    
                            Revised:2013-03-04
                    
                            Style
                            2789
                        
                            Multiple Conductor Cable with Extruded Non-integral Jacket
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Insulated ConductorLabeled or complies with this Manufacturers AWM singles Procedure.
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional, extruded PVC, 5 mils minimum thickness at any point, over the conductor assembly or extruded PTFE, PFA, FEP or ETFE, 8 mils minimum average thickness, 6 mils minimum thickness at any point.
		
			ShieldOptional.
		
			CoveringOptional, extruded PVC, 5 mils minimum thickness at any point, over the conductor assembly or extruded PTFE, PFA, FEP or ETFE, 8 mils minimum average thickness, 6 mils minimum thickness at any point.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Major diameter of assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 inch or larger140 mil112 mils
		
			* - Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring and External Interconnection in Class 2 Circuits of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2789	Issued:1976-05-21
			Revised:2013-03-04


Rating	60 deg C, 30 Vac, Cable flame.

Insulated Conductor	Labeled or complies with this Manufacturers AWM singles Procedure.

Assembly	Two or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional, extruded PVC, 5 mils minimum thickness at any point, over the conductor assembly or extruded PTFE, PFA, FEP or ETFE, 8 mils minimum average thickness, 6 mils minimum thickness at any point.

Shield	Optional.

Covering	Optional, extruded PVC, 5 mils minimum thickness at any point, over the conductor assembly or extruded PTFE, PFA, FEP or ETFE, 8 mils minimum average thickness, 6 mils minimum thickness at any point.

Shield	Optional.

Jacket	Extruded PVC.
	Major diameter of assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 inch or larger	140 mil	112 mils
	* - Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring and External Interconnection in Class 2 Circuits of Electronic Equipment.