UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2791
                        
                            Issued:1976-06-04
                    
                            Revised:2020-08-27
                    
                            Style
                            2791
                        
                            Multi-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, VW-1 flame 
		
			Conductor40 AWG minimum, material not specified.
		
			InsulationExtruded PE, Extruded Foamed PE, Extruded FRPE, Extruded Foamed FRPE, 4 mils minimum at any point, 100 mils maximum, may be radiation or chemically cross-linked.
		
			AssemblyTwo to ten conductors laid parallel or twisted together, consists of optional inner covering, required shield over any and/or all singles, required jacket, optional shield over jacket and optional outer covering over jacket. Length of lay not specified. Barrier layer or fillers optional.
		
			ShieldRequired, over any and/or all singles.  Optional, over jacket.
		
			CoveringInner Covering, optional, over any or all singles, 2 mils minimum at any point, Extruded PVC, Extruded Polyimide, Extruded Polyester, Extruded PVDF, Extruded ETFE or Non-extruded Lacquered Braid.  Outer Covering, optional, over jacket, Extruded PVC, 5 mils minimum at any point, 40 mils maximum.
		
			JacketExtruded PVC, 5 mils minimum average, 3 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseWiring of Low Energy Non-Hazardous Circuits in Audio and Video Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2791	Issued:1976-06-04
			Revised:2020-08-27


Rating	80 deg C, 30 Vac, VW-1 flame

Conductor	40 AWG minimum, material not specified.

Insulation	Extruded PE, Extruded Foamed PE, Extruded FRPE, Extruded Foamed FRPE, 4 mils minimum at any point, 100 mils maximum, may be radiation or chemically cross-linked.

Assembly	Two to ten conductors laid parallel or twisted together, consists of optional inner covering, required shield over any and/or all singles, required jacket, optional shield over jacket and optional outer covering over jacket. Length of lay not specified. Barrier layer or fillers optional.

Shield	Required, over any and/or all singles. Optional, over jacket.

Covering	Inner Covering, optional, over any or all singles, 2 mils minimum at any point, Extruded PVC, Extruded Polyimide, Extruded Polyester, Extruded PVDF, Extruded ETFE or Non-extruded Lacquered Braid. Outer Covering, optional, over jacket, Extruded PVC, 5 mils minimum at any point, 40 mils maximum.

Jacket	Extruded PVC, 5 mils minimum average, 3 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Wiring of Low Energy Non-Hazardous Circuits in Audio and Video Equipment.