UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2806
                        
                            Issued:1976-07-15
                    
                            Revised:2012-03-15
                    
                            Style
                            2806
                        
                            Bonded Non-Extruded Flat Ribbon Cable
                    
			Rating90 deg C, 90 Vac, Horizontal flame.
		
			Conductor36 AWG - 10 AWG plated, round or flat, straight or irregular shaped.
		
			InsulationNon-Extruded PET, PETP 1.0 mil minimum thickness at any point. Top and bottom insulation bonded together with 3.0 mils minimum thickness at any point PVC, or 1.5 mils minimum of polyester adhesive. 15 mils minimum distance between adjacent conductors. 15 mil minimum insulation edge width.
		
			AssemblyTwo through 150 conductors laid parallel and in one plane.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2806	Issued:1976-07-15
			Revised:2012-03-15


Rating	90 deg C, 90 Vac, Horizontal flame.

Conductor	36 AWG - 10 AWG plated, round or flat, straight or irregular shaped.

Insulation	Non-Extruded PET, PETP 1.0 mil minimum thickness at any point. Top and bottom insulation bonded together with 3.0 mils minimum thickness at any point PVC, or 1.5 mils minimum of polyester adhesive. 15 mils minimum distance between adjacent conductors. 15 mil minimum insulation edge width.

Assembly	Two through 150 conductors laid parallel and in one plane.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Appliances.