UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2839
                        
                            Issued:1976-11-29
                    
                            Revised:2019-11-06
                    
                            Style
                            2839
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating90 deg C, 600 Vac, Horizontal flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturershall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketPVC
		
			Constructionmajor dia in inchesmin averageminimum at any point
		
			Construction A0.425 or less30 mils24 mils
		
			construction A0.426-0.700 dia60 avg48 min
		
			construction A0.701-1.500 dia80 avg64 min
		
			construction B0.700 dia or less60 avg48 min
		
			construction B0.701-1.500 dia80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseCONSTRUCTION A Internal wiring of x-ray equipment; or, in the internal or external interconnection of electronic equipment. CONSTRUCTION B External interconnection of electronic equipment in abuse areas (such as x-ray equipment and business machines). In addition, the tag may also indicate the following: 2500 V peak-for Electronic Use Only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2839	Issued:1976-11-29
			Revised:2019-11-06


Rating	90 deg C, 600 Vac, Horizontal flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturershall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	PVC
	Construction	major dia in inches	min average	minimum at any point
	Construction A	0.425 or less	30 mils	24 mils
	construction A	0.426-0.700 dia	60 avg	48 min
	construction A	0.701-1.500 dia	80 avg	64 min
	construction B	0.700 dia or less	60 avg	48 min
	construction B	0.701-1.500 dia	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	CONSTRUCTION A Internal wiring of x-ray equipment; or, in the internal or external interconnection of electronic equipment. CONSTRUCTION B External interconnection of electronic equipment in abuse areas (such as x-ray equipment and business machines). In addition, the tag may also indicate the following: 2500 V peak-for Electronic Use Only.