UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2844
                        
                            Issued:1976-12-27
                    
                            Revised:2011-10-05
                    
                            Style
                            2844
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60, 80 deg C, 30 Vac, Horizontal flame.
		
			Conductor50 AWG minimum, material and stranding not specified.
		
			InsulationExtruded solid FRPE, extruded foamed FRPE, extruded solid PE, extruded foamed PE, extruded solid polyester, extruded foamed polyester, extruded solid PVC, extruded foamed PVC, extruded solid XLFRPE, extruded foamed XLFRPE, extruded solid XLPE, extruded foamed XLPE, extruded solid XL polyester, extruded foamed XL polyester, extruded solid XLPVC, or extruded foamed XLPVC, 2 mils min average thickness.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and or fillers optional. Two or three conductors and or conductor groups may be laid parallel to form flat cable. Manufacturer shall maintain a complete description of each assembly. Insulated conductor is built with optional shield over insulation, optional 1st covering, optional 2nd covering, optional shield over covering and optional 3rd covering.
		
			ShieldOptional.
		
			CoveringFirst covering (optional) - Extruded PVC, 2 mils minimum at any point or polyester film, thickness not specified. Second covering (optional) - Extruded PVC, extruded nylon (polyamide), extruded polyester or lacquered braid. Third covering (optional) - Extruded PVC, 2 mils minimum at any point or polyester film.
		
			JacketExtruded PVC, 2 mils min average, 1.8 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor internal wiring of Class 2 circuits in electronic equipment or, external patch cord for use between units in rack mounted equipment/component systems in Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2844	Issued:1976-12-27
			Revised:2011-10-05


Rating	60, 80 deg C, 30 Vac, Horizontal flame.

Conductor	50 AWG minimum, material and stranding not specified.

Insulation	Extruded solid FRPE, extruded foamed FRPE, extruded solid PE, extruded foamed PE, extruded solid polyester, extruded foamed polyester, extruded solid PVC, extruded foamed PVC, extruded solid XLFRPE, extruded foamed XLFRPE, extruded solid XLPE, extruded foamed XLPE, extruded solid XL polyester, extruded foamed XL polyester, extruded solid XLPVC, or extruded foamed XLPVC, 2 mils min average thickness.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and or fillers optional. Two or three conductors and or conductor groups may be laid parallel to form flat cable. Manufacturer shall maintain a complete description of each assembly. Insulated conductor is built with optional shield over insulation, optional 1st covering, optional 2nd covering, optional shield over covering and optional 3rd covering.

Shield	Optional.

Covering	First covering (optional) - Extruded PVC, 2 mils minimum at any point or polyester film, thickness not specified. Second covering (optional) - Extruded PVC, extruded nylon (polyamide), extruded polyester or lacquered braid. Third covering (optional) - Extruded PVC, 2 mils minimum at any point or polyester film.

Jacket	Extruded PVC, 2 mils min average, 1.8 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For internal wiring of Class 2 circuits in electronic equipment or, external patch cord for use between units in rack mounted equipment/component systems in Class 2 circuits only.