UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2851
                        
                            Issued:1977-02-04
                    
                            Revised:2011-08-23
                    
                            Style
                            2851
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal Flame.
		
			Conductor40 AWG Min.
		
			InsulationExtruded PVC or foamed PVC, extruded XLPVC or foamed XLPVC. 4 mils min average thickness.
		
			Assembly2-30 insulated conductors. Two insulated conductors or two to four groups of twisted insulated singles my be laid parallel to form flat cable, or two or more twisted insulated singles or groups of twisted insulated singles cabled together. Fillers and barrier layer are optional.
		
			ShieldOptional.
		
			CoveringOptional. Extruded PVC, Nylon (Polyamide), ETFE, Polyester, or lacquered braid. May be irradiated. 2 mils minimum thickness at any point.
		
			JacketExtruded PVC, 5 mils min average thickness, 3 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2851	Issued:1977-02-04
			Revised:2011-08-23


Rating	80 deg C, 30 Vac, Horizontal Flame.

Conductor	40 AWG Min.

Insulation	Extruded PVC or foamed PVC, extruded XLPVC or foamed XLPVC. 4 mils min average thickness.

Assembly	2-30 insulated conductors. Two insulated conductors or two to four groups of twisted insulated singles my be laid parallel to form flat cable, or two or more twisted insulated singles or groups of twisted insulated singles cabled together. Fillers and barrier layer are optional.

Shield	Optional.

Covering	Optional. Extruded PVC, Nylon (Polyamide), ETFE, Polyester, or lacquered braid. May be irradiated. 2 mils minimum thickness at any point.

Jacket	Extruded PVC, 5 mils min average thickness, 3 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.