UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2854
                        
                            Issued:1977-02-10
                    
                            Revised:2013-03-04
                    
                            Style
                            2854
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum.
		
			Insulated ConductorLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo or three insulated singles or cables laid parallel or two or more conductors, twisted pairs or groups of twisted conductors twisted together. May include fillers or barrier layer. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC, 5 mils minimum average thickness, 3 mils minimum thickness at any point. If parallel construction is rippable, the measurements are made after ripping.

			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment in Class 2 Systems Only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2854	Issued:1977-02-10
			Revised:2013-03-04


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum.

Insulated Conductor	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two or three insulated singles or cables laid parallel or two or more conductors, twisted pairs or groups of twisted conductors twisted together. May include fillers or barrier layer. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Jacket	Extruded PVC, 5 mils minimum average thickness, 3 mils minimum thickness at any point. If parallel construction is rippable, the measurements are made after ripping.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment in Class 2 Systems Only.