UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2863
                        
                            Issued:1977-03-31
                    
                            Revised:2011-08-11
                    
                            Style
                            2863
                        
                            Parallel Cable with Extruded Integral Insulation and Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, material not specified, same or mixed AWG sizes.
		
			InsulationFRPE or PE or PVC or XLPE or XLPVC, Solid or cellular, 5 mils minimum average thickness, 4 mils minimum thickness at any point, 100 mils maximum.
		
			AssemblyTwo to twenty conductors. Coaxial or twisted, with or without shield, laid in parallel. Filler or barrier layer optional. Insulated conductors is built with optional shield, jacket and optional jacket.
		
			ShieldOptional
		
			JacketInner jacket - PVC, 4 mils minimum average thickness, 3 mils minimum thickness at any point before ripping. Outer jacket - Optional, Extruded PVC, 8 mils minimum thickness at any point before ripping before ripping.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2863	Issued:1977-03-31
			Revised:2011-08-11


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, material not specified, same or mixed AWG sizes.

Insulation	FRPE or PE or PVC or XLPE or XLPVC, Solid or cellular, 5 mils minimum average thickness, 4 mils minimum thickness at any point, 100 mils maximum.

Assembly	Two to twenty conductors. Coaxial or twisted, with or without shield, laid in parallel. Filler or barrier layer optional. Insulated conductors is built with optional shield, jacket and optional jacket.

Shield	Optional

Jacket	Inner jacket - PVC, 4 mils minimum average thickness, 3 mils minimum thickness at any point before ripping. Outer jacket - Optional, Extruded PVC, 8 mils minimum thickness at any point before ripping before ripping.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.