UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2875
                        
                            Issued:1977-08-10
                    
                            Revised:2012-04-18
                    
                            Style
                            2875
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor27 AWG - 16 AWG, solid or stranded.
		
			InsulationExtruded FRPE, extruded foamed FRPE, extruded PE, or extruded foamed PE, 31 mils min average, 28 mils minimum at any point.
		
			AssemblyTwo to four conductors.
		
			CoveringOptional. A textile braid, extruded nylon jacket (2 mils min. thickness), or min. 8 mils of extruded SRPVC or extruded PVC may be applied between the insulation and shield.
		
			ShieldShielding over conductor insulation shall consist of 38 - 30 AWG, tinned or untinned copper strands applied as a wrap or braid or a wrap of aluminum faced Polyester tape with or without an uninsulated drain wire. Double shielding consisting of two or combinations of two of the above may be employed.
		
			JacketExtruded PVC, 30 mils min average, 24 mils minimum at any point before ripping.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2875	Issued:1977-08-10
			Revised:2012-04-18


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	27 AWG - 16 AWG, solid or stranded.

Insulation	Extruded FRPE, extruded foamed FRPE, extruded PE, or extruded foamed PE, 31 mils min average, 28 mils minimum at any point.

Assembly	Two to four conductors.

Covering	Optional. A textile braid, extruded nylon jacket (2 mils min. thickness), or min. 8 mils of extruded SRPVC or extruded PVC may be applied between the insulation and shield.

Shield	Shielding over conductor insulation shall consist of 38 - 30 AWG, tinned or untinned copper strands applied as a wrap or braid or a wrap of aluminum faced Polyester tape with or without an uninsulated drain wire. Double shielding consisting of two or combinations of two of the above may be employed.

Jacket	Extruded PVC, 30 mils min average, 24 mils minimum at any point before ripping.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Electronic Equipment.