UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2876
                        
                            Issued:1977-08-26
                    
                            Revised:2011-10-24
                    
                            Style
                            2876
                        
                            Multiple-conductor cable using extruded non-integral jacket.
                    
			Rating80 deg C, Voltage not specified, Horizontal flame, Cable flame.
		
			Conductor40 AWG minimum
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form an oval or flat cable with no more than three rows of single conductors or groups of conductors. Fillers and barrier layers optional.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter under core assemblyMinimum average thicknessMinimum thickness at any point
		
			0.700 inches or less30 mils24 mils
		
			0.701-1.000 inches60 mils48 mils
		
			1.001-1.500 inches80 mils64 mils
		
			1.501-2.500 inches110 mils88 mils
		
			2.501 inches and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External Interconnection of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2876	Issued:1977-08-26
			Revised:2011-10-24


Rating	80 deg C, Voltage not specified, Horizontal flame, Cable flame.

Conductor	40 AWG minimum

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form an oval or flat cable with no more than three rows of single conductors or groups of conductors. Fillers and barrier layers optional.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter under core assembly	Minimum average thickness	Minimum thickness at any point
	0.700 inches or less	30 mils	24 mils
	0.701-1.000 inches	60 mils	48 mils
	1.001-1.500 inches	80 mils	64 mils
	1.501-2.500 inches	110 mils	88 mils
	2.501 inches and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External Interconnection of Electronic Equipment.