UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2887
                        
                            Issued:1977-09-14
                    
                            Revised:2012-07-10
                    
                            Style
                            2887
                        
                            Bonded or Laminated Flat Cable.
                    
			Rating90 deg C, 300 Vac, Horizontal Flame.
		
			Conductor32 AWG - 12 AWG, Solid or Stranded, Round or Flat.
		
			InsulationNon-Extruded (Laminated) Polyester and PET, 3 mils minimum average or Extruded PVC, 3 mils minimum average.
		
			AssemblyTwo to 150 conductors. Minimum thickness of 1.5 mils; maximum thickness of 6.0 mils. Conductors may be straight or irregular shaped and laid parallel and in one plane. Minimum width of 10 mils and maximum width of 100 mils. On each side of the conductors 3.5 mils minimum of PVC bonded or 1.5 mils minimum of polyester adhesive bonded to 1.5 mils minimum of biaxially oriented polyethylene terephthalate (Polyester) Minimum 16 mils insulation on width on outside edges of conductors and 16 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2887	Issued:1977-09-14
			Revised:2012-07-10


Rating	90 deg C, 300 Vac, Horizontal Flame.

Conductor	32 AWG - 12 AWG, Solid or Stranded, Round or Flat.

Insulation	Non-Extruded (Laminated) Polyester and PET, 3 mils minimum average or Extruded PVC, 3 mils minimum average.

Assembly	Two to 150 conductors. Minimum thickness of 1.5 mils; maximum thickness of 6.0 mils. Conductors may be straight or irregular shaped and laid parallel and in one plane. Minimum width of 10 mils and maximum width of 100 mils. On each side of the conductors 3.5 mils minimum of PVC bonded or 1.5 mils minimum of polyester adhesive bonded to 1.5 mils minimum of biaxially oriented polyethylene terephthalate (Polyester) Minimum 16 mils insulation on width on outside edges of conductors and 16 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.