UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2888
                        
                            Issued:1977-09-14
                    
                            Revised:2012-07-23
                    
                            Style
                            2888
                        
                            Multple-conductor cable using non-intergral jacket
                    
			Rating125 deg C, 300 Vac.
		
			Conductor16 AWG minimum solid or stranded round, tinned or bare copper.
		
			InsulationLabeled style 5158
		
			AssemblyTwo, Style 5158 conductors with metal crimps spaced at Assembly specified intervals are laid parallel. The metal crimps so located so that there is equal distance between crimp of opposite conductor. The heating element is spirally wound over this assembly and spot-soldered to the crimps. The jacket and braid is then applied over the assembly.
		
			BraidCopper braid consisting of No. 36 AWG minimum bare or tinned copper providing a closely woven braid.
		
			JacketETFE, 16 mils min average, 12 mils minimum at any point.
		
			Misc.Heating Element - Copper alloy, Nichrome or other suitable resistance wire element spirally wound around the insulation; size and number of twins dependent upon wattage demand.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2888	Issued:1977-09-14
			Revised:2012-07-23


Rating	125 deg C, 300 Vac.

Conductor	16 AWG minimum solid or stranded round, tinned or bare copper.

Insulation	Labeled style 5158

Assembly	Two, Style 5158 conductors with metal crimps spaced at Assembly specified intervals are laid parallel. The metal crimps so located so that there is equal distance between crimp of opposite conductor. The heating element is spirally wound over this assembly and spot-soldered to the crimps. The jacket and braid is then applied over the assembly.

Braid	Copper braid consisting of No. 36 AWG minimum bare or tinned copper providing a closely woven braid.

Jacket	ETFE, 16 mils min average, 12 mils minimum at any point.

Misc.	Heating Element - Copper alloy, Nichrome or other suitable resistance wire element spirally wound around the insulation; size and number of twins dependent upon wattage demand.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.