UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2892
                        
                            Issued:1977-09-22
                    
                            Revised:2019-11-07
                    
                            Style
                            2892
                        
                            Multiple conductor with Extruded Insulation and Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Conductor32 AWG - 20 AWG solid or stranded round.
		
			InsulationSRPVC, 7 mils minimum average thickness , 5.0 mil minimum thickness at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			major dia in inches
		
			0.250 or less15 mils minimum average thickness12 mils minimum thickness at any point
		
			0.251-0.425 dia30 avg24 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment in Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2892	Issued:1977-09-22
			Revised:2019-11-07


Rating	80 deg C, 30 Vac, Cable flame.

Conductor	32 AWG - 20 AWG solid or stranded round.

Insulation	SRPVC, 7 mils minimum average thickness , 5.0 mil minimum thickness at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	major dia in inches
	0.250 or less	15 mils minimum average thickness	12 mils minimum thickness at any point
	0.251-0.425 dia	30 avg	24 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment in Class 2 circuits only.