UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2896
                        
                            Issued:1977-11-18
                    
                            Revised:2011-09-16
                    
                            Style
                            2896
                        
                            Laminated Flat Ribbon Cable.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor42-12 AWG flat or round.
		
			Insulation(1)  PVC film, 3.5 mils minimum thickness bonded each side of conductors, or (2)  PET film, 0.4 mil minimum thickness bonded each side of conductors, with Polyester adhesive, 0.5 mil minimum thickness, or (3)  PET film or FR Polyester, 0.4 mil minimum thickness, and PVC film, 0.5 mil minimum thickness bonded each side of conductors, 10 mils minimum edge width and 3 mils minimum distance between conductors, or (4)  PI film, 0.4 mil minimum thickness bonded on each side of conductors, with Polyester adhesive, 0.4 mil minimum thickness, 0.8 mil minimum total combined thickness.
		
			Assembly2 to 150 conductors.  Straight or irregular paralled in one plane.
		
			ShieldOptional.  Metal faced polymeric tape.  Drain wire optional.
		
			CoveringOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2896	Issued:1977-11-18
			Revised:2011-09-16


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	42-12 AWG flat or round.

Insulation	(1) PVC film, 3.5 mils minimum thickness bonded each side of conductors, or (2) PET film, 0.4 mil minimum thickness bonded each side of conductors, with Polyester adhesive, 0.5 mil minimum thickness, or (3) PET film or FR Polyester, 0.4 mil minimum thickness, and PVC film, 0.5 mil minimum thickness bonded each side of conductors, 10 mils minimum edge width and 3 mils minimum distance between conductors, or (4) PI film, 0.4 mil minimum thickness bonded on each side of conductors, with Polyester adhesive, 0.4 mil minimum thickness, 0.8 mil minimum total combined thickness.

Assembly	2 to 150 conductors. Straight or irregular paralled in one plane.

Shield	Optional. Metal faced polymeric tape. Drain wire optional.

Covering	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.