UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2897
                        
                            Issued:1977-12-01
                    
                            Revised:2012-03-07
                    
                            Style
                            2897
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. Extruded PVC, 6 mils or heavier may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Dia of cable under jacket inchesMinimum average milsMinimum at any point mils
		
			0.250 or less1512
		
			0.251-0.4253024
		
			0.426-0.7004536
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			1.501-2.50011088
		
			2.501 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2897	Issued:1977-12-01
			Revised:2012-03-07


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, 6 mils or heavier may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Dia of cable under jacket inches	Minimum average mils	Minimum at any point mils
	0.250 or less	15	12
	0.251-0.425	30	24
	0.426-0.700	45	36
	0.701-1.000	60	48
	1.001-1.500	80	64
	1.501-2.500	110	88
	2.501 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.