UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2902
                        
                            Issued:1978-01-30
                    
                            Revised:2012-07-27
                    
                            Style
                            2902
                        
                            Laminated Flat Cable.
                    
			Rating60, 80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, flat or round.
		
			Assembly2 - 100 uninsulated conductors laid parallel in one plane, laminated between two composite sheets of Non extruded Polyester/PVC or FRPE or one composite non-extruded Polyester/PVC or FRPE sheet and one non-extruded PVC sheet. May include mixed AWG sizes. Minimum 25 mils between conductors, 20 mils minimum edge width.
		
			CoveringComposite non-extruded Polyester/PVC or FRPE sheets on each side or one non-extruded Polyester/PVC sheet on one side and non-extruded PVC sheet on the other side. Minimum 2 mils insulation over the conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 Circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2902	Issued:1978-01-30
			Revised:2012-07-27


Rating	60, 80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, flat or round.

Assembly	2 - 100 uninsulated conductors laid parallel in one plane, laminated between two composite sheets of Non extruded Polyester/PVC or FRPE or one composite non-extruded Polyester/PVC or FRPE sheet and one non-extruded PVC sheet. May include mixed AWG sizes. Minimum 25 mils between conductors, 20 mils minimum edge width.

Covering	Composite non-extruded Polyester/PVC or FRPE sheets on each side or one non-extruded Polyester/PVC sheet on one side and non-extruded PVC sheet on the other side. Minimum 2 mils insulation over the conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 Circuits in electronic equipment.