UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2905
                        
                            Issued:1978-01-30
                    
                            Revised:2019-11-07
                    
                            Style
                            2905
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, Voltage not specified, Horizontal flame.
		
			Conductor40 AWG min.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. the conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier Extruded PVC covering may be over the conductor assembly.
		
			JacketExtruded PVC;
		
			major dia in inches
		
			0.350 or less15 mils minimum average thickness12 mils minimum thickness at any point
		
			0.351-0.700 dia30 avg24 min
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min.
		
			- Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring. Tags may indicate the following: "600 volts Peak for Electronic use only".
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2905	Issued:1978-01-30
			Revised:2019-11-07


Rating	80 deg C, Voltage not specified, Horizontal flame.

Conductor	40 AWG min.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. the conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier Extruded PVC covering may be over the conductor assembly.

Jacket	Extruded PVC;
	major dia in inches
	0.350 or less	15 mils minimum average thickness	12 mils minimum thickness at any point
	0.351-0.700 dia	30 avg	24 min
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min.

	- Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring. Tags may indicate the following: "600 volts Peak for Electronic use only".