UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2906
                        
                            Issued:1978-01-30
                    
                            Revised:2019-10-11
                    
                            Style
                            2906
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. Extruded PVC, 6 mils thickness.
		
			JacketPVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.350 inch or less15 mils12 mils
		
			0.351-0.700 inch30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2906	Issued:1978-01-30
			Revised:2019-10-11


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. Extruded PVC, 6 mils thickness.

Jacket	PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.350 inch or less	15 mils	12 mils
	0.351-0.700 inch	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.